OurHOA
Board & governance

How do we hire a handyman for small HOA repairs and keep it above board?

By OurHOA · General information · Revised

How an HOA board hires a handyman for small common-area repairs: what they may legally do, insurance, a one-page agreement, job caps, W-9 and 1099 rules.

Part of the HOA board handbook: vendors, projects and upkeep.

The short answer

Most self-managed associations need someone who will rehang a pool gate, replace a clubhouse faucet, patch a fence picket and swap a burned-out light fixture without a bid package for each one. A handyman is the right hire for that work, as long as the board sets three limits before the first call. First, the handyman does only the work they are legally allowed to do, which rules out most electrical, plumbing and HVAC work. Second, every job has a dollar cap above which a director must approve it in writing first. Third, the association has the handyman's insurance certificate and W-9 on file before it pays a dollar. Put those limits on one page, have the board approve it at a meeting, and run every job through a simple log. Rules vary by state and by your governing documents, and this guide is education, not legal advice.

Where a handyman's license stops in Texas, Florida and Colorado

Licensing attaches to the trade, not to the word handyman, so start with the job list and ask which items touch a licensed trade. Texas. The Texas Department of Licensing and Regulation says anyone who performs or offers to perform non-exempt electrical work must be licensed and must do the work through a licensed electrical contractor. TDLR also licenses contractors who install, repair or maintain air conditioning, refrigeration and heating systems. Plumbing is licensed by the Texas State Board of Plumbing Examiners. A handyman can paint, repair fences and doors, and replace hardware. Rewiring a pavilion light or repairing a clubhouse condenser goes to a licensed trade. Florida. Section 489.103(9) exempts work that is casual, minor or inconsequential when the aggregate contract price for labor, materials and everything else is under $2,500. The exemption does not apply when the work is part of a larger operation, when a job is split into smaller contracts to stay under the limit, or when the person advertises as a contractor or claims to be qualified to contract. Electrical work is licensed under a separate part of chapter 489, so the $2,500 rule is not a pass for wiring. Colorado. Section 12-115-109 requires a state license to work as an electrician, and section 12-155-108 does the same for plumbers. The exemptions in sections 12-115-116 and 12-155-118 cover some maintenance and repair of existing facilities, such as routine replacement of faucets, sinks and toilets by someone the property owner employs, but each comes with conditions. Ask the state board or the association's attorney before relying on one for a clubhouse or pool building. In every state, check city and county permit rules too. A fence replacement or a new deck stair may need a permit no matter who builds it.

Check the person before the first job

Ask for four things and keep them in the vendor file. A certificate of insurance showing general liability, with the association named as certificate holder and, if your policy requires it, as additional insured. If the handyman has employees, ask about workers' compensation and talk to your insurance agent about what happens if an uninsured helper is hurt on common area. Our guide on how to check a vendor certificate of insurance walks through reading the form line by line. A signed IRS Form W-9. The IRS describes the W-9 as the form a payee uses to give its correct taxpayer identification number to whoever must file an information return. No W-9, no first payment. If a handyman refuses, our guide on what to do when a vendor won't give the HOA a W-9 covers the backup withholding rules. Two references from other properties, ideally another HOA, an apartment complex or a church. Ask whether invoices matched the work and whether the person showed up when promised. A rate sheet: hourly rate, minimum charge or trip fee, after-hours rate, and how materials are billed. Cost plus 10 to 15 percent, or at cost with receipts, are both common. Pick one and write it down.

Put the arrangement on one page

A handyman does not need a 20-page contract, but a handshake leaves the board guessing about rates, keys and who decided what. A one-page standing agreement works. It should say: - Rates, trip charge and materials billing, fixed for 12 months. - A per-job cap. A common choice is $500. Anything above it needs a written estimate and a director's approval by email before work starts. - An annual cap, after which the board revisits the arrangement at a meeting. - No electrical, plumbing, gas, HVAC, roof or structural work unless the board approves it separately and the handyman holds the license the work requires. - Before and after photos with each invoice, plus the address or location of the work. - Keys and gate codes signed out and returned on request, and at the end of the arrangement. - Either side can end it with 15 days' written notice. Sample motion: "Move that the association engage [name] as an independent contractor for minor common-area repairs on the terms in the standing agreement dated [date], at $[rate] per hour, with individual jobs over $500 requiring prior written approval of the president or treasurer, and total payments not to exceed $[amount] in the fiscal year without further board action." In Florida, watch the annual figure. Section 720.3055 requires competitive bids when a contract requires payment above 10 percent of the total annual budget, reserves included. A busy handyman on a small budget can cross that line.

Run every job through a log

The log is what lets the treasurer pay invoices without calling three directors. One shared spreadsheet is enough. Columns: date requested, who asked, location, description, estimate, approved by, date done, invoice number, amount paid. A typical small job moves like this. Day 1: an owner reports a loose railing at the pond overlook, and the director on duty logs it and texts the handyman a photo. Day 2: the handyman looks and quotes $180. That is under the cap, so the director replies "approved" by email and adds it to the log. Day 5: the work is done, and the handyman sends photos and an invoice. Day 6: the treasurer matches the invoice to the log line and pays it in the next bill run. Only named directors can request work. If owners can text the handyman directly, the association ends up paying for someone's private patio repair. Give the handyman a short list: the president, the director who handles grounds, and the treasurer for billing questions.

Keep the handyman a contractor, and file the 1099

The IRS looks at the whole relationship and the degree of control. It groups the facts into three categories: behavioral (does the association control how the work is done), financial (does the association control the business side, such as tools, expenses and how the worker is paid), and type of relationship (written contracts, benefits, permanence). No single factor decides it. An association can stay on the contractor side by buying results, not hours of availability. Describe the job and the deadline, let the handyman choose methods and tools, pay by invoice, and let them work for others. Setting a weekly schedule, handing out association tools and directing the work hour by hour start to look like employment. If that is what the community needs, read our guide on setting up payroll for an HOA's first employee instead. For payments made in 2026, Form 1099-NEC is required when the association pays a nonemployee $2,000 or more for services in the year, up from $600, and it is due to the IRS and the contractor by January 31. Payments made by credit or debit card are reported by the card processor on Form 1099-K, not by the association. Track the running total in the log so the treasurer is not reconstructing it in January.

Mistakes boards make with handymen

Splitting a job to stay under a cap. Three $450 invoices for one fence run is a $1,350 job. Florida's section 489.103(9) says so expressly for its $2,500 exemption, and your own cap should be read the same way. Hiring a director's relative without the conflict steps. Disclose the relationship at a meeting, have the related director step out of the vote, and record it in the minutes. Do the same if a director is the handyman. Paying cash. Pay by check or bank transfer from the association account, against an invoice, every time. Letting the scope creep. The handyman who fixes door closers starts replacing a pool pump motor because nobody said not to. Repeat the excluded-work list in the agreement and in the approval email. Never collecting the keys. When the arrangement ends, get every key and fob back the same week, change the gate code, and note both in the log. Skipping the renewal check. Once a year, at the budget meeting, pull the log total, confirm the insurance certificate has not expired, and decide whether the volume of work now justifies a formal bid.

Sources

These guides are general education for HOA boards and residents, not legal, tax, or financial advice. Rules vary by state and by your community's governing documents - check with a professional for your situation.

More from the board handbook

Track every request from report to done

Assign maintenance requests to a board member, email vendors a work order with photos, and keep the history. Free to start.